Message boards : Number crunching : Problems and Technical Issues with Rosetta@home
Previous · 1 . . . 59 · 60 · 61 · 62 · 63 · 64 · 65 . . . 295 · Next
Author | Message |
---|---|
robertmiles Send message Joined: 16 Jun 08 Posts: 1229 Credit: 14,172,067 RAC: 1,095 |
12 CPU WUs hogging up my PC, using only 1 cpu core. That probably indicates that you have told BOINC Manager that it can use only one CPU core. In Advanced view, click on Options, then Computing preferences. Adjust the fraction of the available CPU cores (show as CPUs here), possibly adding 1% to the fraction you really want to keep roundoff from causing problems. After adjusting this, click on Save at the bottom of that window. |
robertmiles Send message Joined: 16 Jun 08 Posts: 1229 Credit: 14,172,067 RAC: 1,095 |
If you use a huge value here, DON'T add project CPDN or project RNA World without first setting a smaller value instead. Both of these projects have tasks that run for months, so the huge value will keep any other projects from getting turns for CPU use. Note that if you have enough main memory and have the setting to keep tasks in main memory even when not running, you won't be using the disk checkpoints except except when BOINC restarts. The project applications need to be able to adjust any timeouts when restarting from pauses, unless the timeouts are based on time when running rather than clock time. |
EHM-1 Send message Joined: 21 Mar 20 Posts: 23 Credit: 183,782 RAC: 0 |
@EricM: Thanks to the three of you for your input! @Peter, your 17-hour comment addresses a question I almost posed. It would be good of the Lords of BOINC to make clear in the settings if the application switching interval setting refers to elapsed time or task run-time. @Brian, I was planning to implement your suggestions, but first waited to see how BOINC would react to my having suspended World Community Grid / OpenPandemics (my only other active project). As I suspected might occur, Rosetta started processing again at screensaver invocation, and I noted that BOINC had fetched four new Rosetta units. Of course I don't know if that was prompted by the suspension and/or the result of my having changed the application switching interval, or mere coincidence. Given this, would you say I should still change my work storage settings? To answer your questions:
system: up-to-date Windows 10, Intel quad-core 3.6 GHz processor, 8 GB RAM |
robertmiles Send message Joined: 16 Jun 08 Posts: 1229 Credit: 14,172,067 RAC: 1,095 |
EricM, @Robert, I think your comment regarding deadlines and the server determining reliability of my computer could explain at least part of the reason for Rosetta being stalled the past few days. I was away Sun-Tue, so maybe the server gave up on the partially completed work units on my machine? If the cause is something like that, it makes me think that Rosetta is less tolerant that SETI was in this regard. It's likely that the server gave up for the partially completed tasks. This may make it think your computer is unreliable at returning results fast enough. Rosetta@home NEEDS results from previous tasks to generate most of the next round of workunits. Also, it considers COVID-19 work urgent. This means short deadlines are likely. SETI recently decided to pause their last few years of work to analyze the results, and think about what to try next. In other words, they do not consider their work urgent, so long deadlines are likely. Also, you might try changing your settings to use 50% (or 51% to avoid roundoff error) of the CPUs, but 100% of the CPU time. This will make it finish each task faster, although sometimes with fewer tasks in progress. That would increase your chances of returning tasks on time. |
Grant (SSSF) Send message Joined: 28 Mar 20 Posts: 1631 Credit: 16,732,775 RAC: 11,309 |
When the user changes the weighting, it should have immediate effect.I does, as you yourself noted. Boinc went utterly mental and ran almost exclusively LHC, presumably doing some weird lookback over the last week and seeing it hadn't done any. It takes time for changes to settle down as it now has to balance out the new debts & credits between projects to match the new settings. That takes time to do- ie the time necessary to process the work to produce the Credit to match the new Resource share settings. Grant Darwin NT |
Stevie G Send message Joined: 15 Dec 18 Posts: 107 Credit: 789,591 RAC: 1,132 |
Actually, today Rosetta disappeared from my project list. When I try to log on, it says it is unable. This is a drag. With no response from Rosetta, I added World Community Grid. Steven Gaber Oldsmar, FL |
Grant (SSSF) Send message Joined: 28 Mar 20 Posts: 1631 Credit: 16,732,775 RAC: 11,309 |
Typically, the computer is on 15 hours a day. Sometimes I'm working with it for much of the day, during which BOINC does not run.Why? Rosetta (like Seti) applications are set to run at Idle priority (the lowest level). Any other running programme of similar priority will get equal CPU resources. If it's priority is higher, then Rosetta applications will slow & even stop to allow the higher priority application to use the CPU resources. If there is an application that is affected by having BOINC doing work in the background, you can use the Exclusive applications option to stop BOINC when just that particular application is running. Back in the days of single core or just hyperthreaded systems, yeah you often needed to stop BOINC to allow other programmes to run OK. But with multi core/thread systems, unless the programme you are running is heavily multi threaded it just isn't necessary anymore. Grant Darwin NT |
robertmiles Send message Joined: 16 Jun 08 Posts: 1229 Credit: 14,172,067 RAC: 1,095 |
Typically, the computer is on 15 hours a day. Sometimes I'm working with it for much of the day, during which BOINC does not run.Why? I've found that this will handle CPU time problems, However, the paused BOINC applications usually do NOT release any memory they have allocated, unless you shut down BOINC. Therefore, your plan does not help if the important contention is for memory instead of for CPU time, unless you use the setting for releasing memory from BOINC applications that are not running. |
EHM-1 Send message Joined: 21 Mar 20 Posts: 23 Credit: 183,782 RAC: 0 |
Thanks, @Robert and @Grant. I've never received such prompt and good input in a forum before. Grant, I suspect the only program I use that might tax the processor at times would be ArcGIS, which might have moments when it could be considered heavily multi-threaded. I'm out of my depth trying to determine whether I'll regret giving BOINC more resource access. Robert, I think I'll try your 51/100 settings tip. I wonder if I should alter the memory settings? Eric system: up-to-date Windows 10, Intel quad-core 3.6 GHz processor, 8 GB RAM |
Mr P Hucker Send message Joined: 12 Aug 06 Posts: 1600 Credit: 11,299,570 RAC: 1,951 |
That would interfere with the way it recovers from times when one of the projects has no tasks available to send. I'm not sure I follow you. If I've made a choice that I want different weightings, I obviously want past history forgotten. I want from now on to have the ratio I set. Anything else is just confusing. Imagine you ran project A at 10 and project B at 1. Then you decide one day that you want the reverse, A=1 and B=10. The way it works now, the history shows it's been doing way too much A, so it will consequently do B exclusively, which is not what you just asked it to do. |
Mr P Hucker Send message Joined: 12 Aug 06 Posts: 1600 Credit: 11,299,570 RAC: 1,951 |
* My computer usage would be irregular seen over a couple decades, but is more regular the past few years. Typically, the computer is on 15 hours a day. Sometimes I'm working with it for much of the day, during which BOINC does not run. Other times, the sceensaver might come on 5-10 times per day and run for an hour each time. I have the screensaver set to come on after ten minutes, then I think the comp sleeps after an hour. But, depending on how far back we go -- I ran SETI@home for 20 years -- there are times when the computer is off for a few days or a few weeks, and there was a ten-year era when it would often be running only on weekends. Any particular reason you stop Boinc so much? I leave mine on all the time, with very few programs that it slows down, so I set those as exclusive applications to pause Boinc when they run. 3 games, and VLC media player. Some stop the GPU, some stop the CPU also. Or if you're always running something that needs some CPU for your work, tell Boinc to use less than all the cores, leaving some for you. |
Mr P Hucker Send message Joined: 12 Aug 06 Posts: 1600 Credit: 11,299,570 RAC: 1,951 |
I've found that this will handle CPU time problems, However, the paused BOINC applications usually do NOT release any memory they have allocated, unless you shut down BOINC. Therefore, your plan does not help if the important contention is for memory instead of for CPU time, unless you use the setting for releasing memory from BOINC applications that are not running. Surely the paused Boinc programs would be shoved in the swap file by Windows? |
EHM-1 Send message Joined: 21 Mar 20 Posts: 23 Credit: 183,782 RAC: 0 |
Any particular reason you stop Boinc so much? I leave mine on all the time, with very few programs that it slows down, so I set those as exclusive applications to pause Boinc when they run. 3 games, and VLC media player. Some stop the GPU, some stop the CPU also. I guess when I set it up years ago, I just didn't want it to keep the computer running all day. But maybe I'll try giving it more time and resources. Eric system: up-to-date Windows 10, Intel quad-core 3.6 GHz processor, 8 GB RAM |
Mr P Hucker Send message Joined: 12 Aug 06 Posts: 1600 Credit: 11,299,570 RAC: 1,951 |
Any particular reason you stop Boinc so much? I leave mine on all the time, with very few programs that it slows down, so I set those as exclusive applications to pause Boinc when they run. 3 games, and VLC media player. Some stop the GPU, some stop the CPU also. My 6 run 24/7. Up to 2.5kW (ouch). The plug they all run from is actually warm. |
Brian Nixon Send message Joined: 12 Apr 20 Posts: 293 Credit: 8,432,366 RAC: 0 |
@EricM: OK: this is becoming much more clear. The fact that you now have Rosetta tasks suggests that it was indeed the other project that was getting priority. The missed deadlines are due to the other settings. The project needs your computer to give each task 8 hours of CPU time inside 72 hours of wall time. From what you’ve written, tasks will be taking at best 38 hours to complete (maximum 10 hours per day, at 50% CPU time, and tasks not running at all at other times because either you’re using the computer or it’s asleep). To avoid BOINC downloading more work than it can complete, it’s essential to keep Store at least low. If your computer is frequently/always connected to the Internet, it doesn’t matter: BOINC can always fetch more work when it needs it. You will not be overloading the project server by requesting work that infrequently. I would still recommend reducing Store up to an additional to zero, though in my experience that setting doesn’t seem to influence the amount of work downloaded in any event. |
mikey Send message Joined: 5 Jan 06 Posts: 1895 Credit: 8,922,722 RAC: 1,104 |
That would interfere with the way it recovers from times when one of the projects has no tasks available to send. Easy answer to your hypothesis...the Boinc Developers made that formula and they are the only ones that can change it. Join there email group and ask them why it's the way it is, I'm sure Dr A will give you a response at some point. |
Grant (SSSF) Send message Joined: 28 Mar 20 Posts: 1631 Credit: 16,732,775 RAC: 11,309 |
Grant, I suspect the only program I use that might tax the processor at times would be ArcGIS, which might have moments when it could be considered heavily multi-threaded.That's a pretty old FAQ, from the looks of it v10 can make use of extra cores & threads, but not much unless it is one of their server applications. If you are running a more current version than v10, then i would expect it would make better use of extra cores & threads, possibly even GPU support (if it can make use of GPU support, and you have a supported GPU then i'd suggest taking advantage of that- anything up to a 100 times boost in performance is possible with a high end GPU v a high end CPU if the software can make use of it). I'm out of my depth trying to determine whether I'll regret giving BOINC more resource access.Only way to know is to try it and see- Set it so BOINC isn't suspended while the computer is in use, and see if it affects your other programmes, or if it affects system responsiveness over all. If so, as suggested by Peter you could just reserve 1 or 2 CPU cores/threads for non BOINC use. That way BOINC will never make use of them, even if they aren't being uses by other programmes. Grant Darwin NT |
Brian Nixon Send message Joined: 12 Apr 20 Posts: 293 Credit: 8,432,366 RAC: 0 |
Peter Hucker wrote: 24/7. Up to 2.5kWThat’s ≈£4,000 p.a. on electricity? Ouch indeed… |
Mr P Hucker Send message Joined: 12 Aug 06 Posts: 1600 Credit: 11,299,570 RAC: 1,951 |
Easy answer to your hypothesis...the Boinc Developers made that formula and they are the only ones that can change it. Join there email group and ask them why it's the way it is, I'm sure Dr A will give you a response at some point. Yeah ok.... they're not the listening type. |
Grant (SSSF) Send message Joined: 28 Mar 20 Posts: 1631 Credit: 16,732,775 RAC: 11,309 |
I would still recommend reducing Store up to an additional to zero, though in my experience that setting doesn’t seem to influence the amount of work downloaded in any event.It does, just in very odd ways- It is best to have it as low as possible. Having a large value for Additional days will result the cache running down significantly below the Store at least value, before it then gets more work to build it back up to the Store at least + Additional days value (and the larger each of those values, the greater the run down before it rebuilds the cache again). If people really feel a need for a cache, set it in Store at least value. The Additional days value should be as small as possible. Weird things are much less likely to occur that way. Grant Darwin NT |
Message boards :
Number crunching :
Problems and Technical Issues with Rosetta@home
©2024 University of Washington
https://www.bakerlab.org