Hi.

Your Systems seem to be on a go slow today, i've got tasks that have been sitting pending for around an hour.

Not much work either.

Database status
State Approximate #results
Ready to send__11

Agreed. It's difficult to get work and the validator seems to be on strike.

The following error detected by Windows 7 x64bits monitor and reported:




Source
minirosetta_graphics_3.13_windows_x86_64.exe

Summary
Stopped responding and was closed

Date
‎06/‎07/‎2011 18:06

Status
Report sent

Description
A problem caused this program to stop interacting with Windows.
Faulting Application Path: C:ProgramDataBOINCprojectsboinc.bakerlab.org_rosettaminirosetta_graphics_3.13_windows_x86_64.exe

Problem signature
Problem Event Name: AppHangB1
Application Name: minirosetta_graphics_3.13_windows_x86_64.exe
Application Version: 0.0.0.0
Application Timestamp: 4df10c01
Hang Signature: 576b
Hang Type: 0
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057
Additional Hang Signature 1: 576bbce6b7e2dc337e512e9fa33eecc9
Additional Hang Signature 2: 73b6
Additional Hang Signature 3: 73b623d1e6aac9957fad4586c245a60c
Additional Hang Signature 4: 576b
Additional Hang Signature 5: 576bbce6b7e2dc337e512e9fa33eecc9
Additional Hang Signature 6: 73b6
Additional Hang Signature 7: 73b623d1e6aac9957fad4586c245a60c

Extra information about the problem
Bucket ID: 2046797320

---

Hi

1 x Ubuntu 64 bit 10.04 4GB Phenom II Dual core - Boinc 6.10.17
1 x Ubuntu 64 bit 10.10 4GB Quad core - Boinc 6.10.58

I run Rosetta because I believe in its value - I don't get 'under the hood' to find out error logs etc so if info is needed please ask and tell me where.

I have been crunching 24/7without a problem on either macchine.

However, in the last week I am plagued with computation errors; I would sday 90%+ on both machines.

Are there bad units being put out?

It is very frustrating to suddenly start getting these errors. Both computers are new.

Am I wasting my time with Rosetta or can anybody please shed light on the problem? As I said, you will need to tell me what/where the details are to help track the problem.

Many thanks,
David

Hi

1 x Ubuntu 64 bit 10.04 4GB Phenom II Dual core - Boinc 6.10.17
1 x Ubuntu 64 bit 10.10 4GB Quad core - Boinc 6.10.58

I run Rosetta because I believe in its value - I don't get 'under the hood' to find out error logs etc so if info is needed please ask and tell me where.

I have been crunching 24/7without a problem on either macchine.

However, in the last week I am plagued with computation errors; I would sday 90%+ on both machines.

Are there bad units being put out?

It is very frustrating to suddenly start getting these errors. Both computers are new.

Am I wasting my time with Rosetta or can anybody please shed light on the problem? As I said, you will need to tell me what/where the details are to help track the problem.

Many thanks,
David

Scrolling through your many pages of tasks the first error I found was this one; you can see that your wingman completed it without difficulty. Clicking on the details link lets us see the sdterr out:

<message>
WU download error: couldn't get input files:
<file_xfer_error>
<file_name>run_boinc_csr251_relax_full_correct.zip</file_name>
<error_code>-119</error_code>
<error_message>MD5 check failed</error_message>
</file_xfer_error>

Perhaps you should check if your firewall is blocking or quarantining Rosetta files.

Best,
Snags

Message from server: No work sent

Server Status: Ready to send: 1

Hi.

Getting the same.

Sat 30 Jul 2011 09:54:57 EST rosetta@home Sending scheduler request: To fetch work.
Sat 30 Jul 2011 09:54:57 EST rosetta@home Requesting new tasks
Sat 30 Jul 2011 09:55:00 EST rosetta@home Scheduler request completed: got 0 new tasks
Sat 30 Jul 2011 09:55:00 EST rosetta@home Message from server: No work sent
Sat 30 Jul 2011 09:55:02 EST rosetta@home work fetch suspended by user

---

Message from server: No work sent

Server Status: Ready to send: 1

Yup, same here. R@H's home page shows 0 queued jobs and server status pretends all servers are running fine...

Ralf

Hi Snagletooth

I have never installed a firewall in Ubuntu - I go through a router which protects me.

As I say, everything was fine (therefore port access in the router was setup ok) until suddenly.

And since 6am this morning on this machine, 2 tasks completed ok - the next 9 exited with errors after a few minutes (1hr 09, 30m, 19m, 07m, 17m, 15m, 01m, 0.01m, 0.02m respectively).

It seems odd that 2 computers suddenly became error prone at the same time and and in the same approximate quantity.

I feel very despondent about this - research into cancer is very personal to me and I thought I was contributing, albeit in a small way.

Please help as I am not technical in sorting out why this is being wasted. I'm afraid your paste of the error is double-dutch to me.

David

congratulations Rosie, you ran out of work.
1 tasks ready to send?!?!?!?!
incredible.

Hi Snagletooth

I have never installed a firewall in Ubuntu - I go through a router which protects me.

As I say, everything was fine (therefore port access in the router was setup ok) until suddenly.

And since 6am this morning on this machine, 2 tasks completed ok - the next 9 exited with errors after a few minutes (1hr 09, 30m, 19m, 07m, 17m, 15m, 01m, 0.01m, 0.02m respectively).

It seems odd that 2 computers suddenly became error prone at the same time and and in the same approximate quantity.

I feel very despondent about this - research into cancer is very personal to me and I thought I was contributing, albeit in a small way.

Please help as I am not technical in sorting out why this is being wasted. I'm afraid your paste of the error is double-dutch to me.

David

Hi David

Seeing that Rosetta is out of work, you may wish to try Help Conquer Cancer at World Community Grid. If the tasks run successfully there, I would suggest that the problem you had is merely coincidental. I run 64-bit Ubuntu and have no problems running BOINC.

Hi Warped

All BAM! gets is "Creating account at World Community Grid -> No response from project".

superlinkattechnion has no tasks.

Makes one feel surplus to requirements :-)

David

Hi Warped

All BAM! gets is "Creating account at World Community Grid -> No response from project".

superlinkattechnion has no tasks.

Makes one feel surplus to requirements :-)

David

The server at BAM! is having problems. I suggest you attach using the standard BOINC Manager, Advanced View. In my Ubuntu version of BOINC Manager (6.10.17) the attach to project menu item is in Tools.

I'm ruuning POEM@home and Einstein@home as well as Milkyway@home to keep my system occupied and support both science and medicine. Milkyway has some big stuff that uses all 4 cores at times. Poem has small tasks that zip through your system pretty quick. Einstein is more of standard project. The search for Gravitational waves is very interesting.

Oh yeah, once again someone said awhile back that they would be monitoring the boards for discussions like this one. Once again the system fails and no one see's or says anything about it.

Come on guys! Communication!! Have you not heard of that word?
I ripped you guys once about this, seems I will have to politely do it again.

Progress! Ready to send: 4

Well, I still have a few WUs left... like 24hrs worth of work... if this isn't fixed then I'll have to switch to POEM@home in the meantime.

---

Same problem here.
Looking under the 'Messages' tab in Boinc Manager, I see LOTS of 'No work sent' messages, starting on July 26, with only a few occasional new WU's being downloaded since then.

---

Same problem here.
Looking under the 'Messages' tab in Boinc Manager, I see LOTS of 'No work sent' messages, starting on July 26, with only a few occasional new WU's being downloaded since then.

Same here 0 work sent.. nadda.

---

I have gotten no new work for Rosetta. There is no work being done on my 2 computers.

What's UP?????????????????

---

Same here.. no new tasks from Rosetta for about 2-3 days now....
Glad I'm also running World Community Grid so my PCs stays busy...