Problems with Rosetta version 5.98

Message boards : Number crunching : Problems with Rosetta version 5.98

To post messages, you must log in.

Previous · 1 . . . 7 · 8 · 9 · 10

AuthorMessage
svincent

Send message
Joined: 30 Dec 05
Posts: 219
Credit: 12,120,035
RAC: 0
Message 63845 - Posted: 26 Oct 2009, 19:26:52 UTC

But it wasn't doing anything else that day.
ID: 63845 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Evan

Send message
Joined: 23 Dec 05
Posts: 268
Credit: 402,585
RAC: 0
Message 63847 - Posted: 26 Oct 2009, 21:25:46 UTC

I have occasionally had work units that clock up the elapsed time while the cpu time stays stationary. The only way round it was to reboot the computer which got the work unit past the block and it finished normally.
ID: 63847 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
svincent

Send message
Joined: 30 Dec 05
Posts: 219
Credit: 12,120,035
RAC: 0
Message 63848 - Posted: 26 Oct 2009, 23:24:18 UTC

It seemed like my wingman successfully completed the task in spite of getting the same bunch of errors I got : e.g.

sin_cos_range ERROR: -1.#IND000 is outside of [-1,+1] sin and cos value legal range
etc.

ID: 63848 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
tomba

Send message
Joined: 29 May 06
Posts: 43
Credit: 1,558,972
RAC: 0
Message 63943 - Posted: 3 Nov 2009, 20:06:58 UTC

XP Pro, Pentium D 3.20MHz, Rosetta and GPUGRID.

While the Rosetta chaos below unfolds, GPUGRID merrily rolls along.

Getting lots 'n' lots of these:



My results can be seen here.

I migrated to BOINC 6.10.17. No change. I detached/attached Rosetta. The first two WUs failed within a minute; computation error. Two more WUs are running right now and are at 15%, but I know they aren't gunna complete.

I've no idea what else to try.
ID: 63943 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
tomba

Send message
Joined: 29 May 06
Posts: 43
Credit: 1,558,972
RAC: 0
Message 63956 - Posted: 4 Nov 2009, 17:15:30 UTC - in response to Message 63943.  

XP Pro, Pentium D 3.20MHz, Rosetta and GPUGRID.

While the Rosetta chaos below unfolds, GPUGRID merrily rolls along.

Getting lots 'n' lots of these:



My results can be seen here.

I migrated to BOINC 6.10.17. No change. I detached/attached Rosetta. The first two WUs failed within a minute; computation error. Two more WUs are running right now and are at 15%, but I know they aren't gunna complete.

I've no idea what else to try.


Well - gave up on Rosetta and attached to Einstein. Guess what? Immediate computation errors! I attached to Climate Prediction and that is running fine.

What is it about Rosetta and Einstein on my Pentium D that gives these errors? I have three other PCs happily running Rosetta...
ID: 63956 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
DJStarfox

Send message
Joined: 19 Jul 07
Posts: 145
Credit: 1,250,162
RAC: 0
Message 63957 - Posted: 4 Nov 2009, 17:29:02 UTC - in response to Message 63956.  

What is it about Rosetta and Einstein on my Pentium D that gives these errors? I have three other PCs happily running Rosetta...


Pentium D, is it? How old is that machine?
ID: 63957 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
tomba

Send message
Joined: 29 May 06
Posts: 43
Credit: 1,558,972
RAC: 0
Message 63958 - Posted: 4 Nov 2009, 18:05:56 UTC - in response to Message 63957.  

What is it about Rosetta and Einstein on my Pentium D that gives these errors? I have three other PCs happily running Rosetta...


Pentium D, is it? How old is that machine?


3-1/4 years. It's a Dell Dimension 9100. It's been running BOINC 24/7 since new.

Last june, a month before the warrantee expired, it died. Dell fitted a refurbished MB and PS.

For a year it's been running with 4 gigs of Crucial Ballistix RAM.

Tom
ID: 63958 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
DJStarfox

Send message
Joined: 19 Jul 07
Posts: 145
Credit: 1,250,162
RAC: 0
Message 63960 - Posted: 5 Nov 2009, 0:54:47 UTC - in response to Message 63958.  

3-1/4 years. It's a Dell Dimension 9100....Last june, it died. Dell fitted a refurbished MB and PS.


There's your problem. The capacitors on the motherboard are old and the CPU is generating errors under heavy power load (computation). Time to throw away the system. Get a 2nd opinion if you want, but 'fraid that's what's going on.

I had a system just like this (custom-built). Runs great for normal tasks, but it fails under heavy CPU load. I guess you could try under-clocking the system, but I never found a reason to work at it that hard. Dell's are notorious for expiring with weird symptoms.
ID: 63960 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Profile dcdc

Send message
Joined: 3 Nov 05
Posts: 1831
Credit: 119,404,886
RAC: 9,496
Message 63964 - Posted: 5 Nov 2009, 13:17:42 UTC - in response to Message 63960.  

if possible, just undervolting might fix it (possibly only temporarily but maybe not) - the power consumption increases with the square of the voltage so a small reduction can make a big difference. If you can't undervolt in the BIOS then you might be able to use RMClock...

3-1/4 years. It's a Dell Dimension 9100....Last june, it died. Dell fitted a refurbished MB and PS.


There's your problem. The capacitors on the motherboard are old and the CPU is generating errors under heavy power load (computation). Time to throw away the system. Get a 2nd opinion if you want, but 'fraid that's what's going on.

I had a system just like this (custom-built). Runs great for normal tasks, but it fails under heavy CPU load. I guess you could try under-clocking the system, but I never found a reason to work at it that hard. Dell's are notorious for expiring with weird symptoms.


ID: 63964 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
tomba

Send message
Joined: 29 May 06
Posts: 43
Credit: 1,558,972
RAC: 0
Message 64043 - Posted: 14 Nov 2009, 14:56:58 UTC - in response to Message 63960.  

3-1/4 years. It's a Dell Dimension 9100....Last june, it died. Dell fitted a refurbished MB and PS.


There's your problem. The capacitors on the motherboard are old and the CPU is generating errors under heavy power load (computation). Time to throw away the system. Get a 2nd opinion if you want, but 'fraid that's what's going on.


Well, not wishing to throw it away without trying something, I focused on the RAM. I removed three 1 gig sticks and ran Rosetta with 1 gig for two days without a hiccough. Then I added a second stick and ran for two days; no problems. Then I removed the two sticks and inserted the other two of four; four days sweetness and light. Then I bit the bullet and took it to 4 gigs. All is well!

Funny...

Tom

ID: 64043 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Speedy
Avatar

Send message
Joined: 25 Sep 05
Posts: 163
Credit: 808,098
RAC: 0
Message 64439 - Posted: 12 Dec 2009, 2:32:03 UTC

This is no ploblem, just wondering if there are any tasks still running under this app?
Have a crunching good day!!
ID: 64439 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Mod.Sense
Volunteer moderator

Send message
Joined: 22 Aug 06
Posts: 4018
Credit: 0
RAC: 0
Message 64440 - Posted: 12 Dec 2009, 3:31:24 UTC - in response to Message 64439.  

This is no ploblem, just wondering if there are any tasks still running under this app?


Every few months there is, yes. That's why I've left the sticky on it.
Rosetta Moderator: Mod.Sense
ID: 64440 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Speedy
Avatar

Send message
Joined: 25 Sep 05
Posts: 163
Credit: 808,098
RAC: 0
Message 64444 - Posted: 12 Dec 2009, 4:24:36 UTC

Thanks I cant remember the last time I had a 5.98 task. I will look out for a 5.98 task.
Have a crunching good day!!
ID: 64444 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Callum

Send message
Joined: 20 Oct 09
Posts: 1
Credit: 39,407
RAC: 0
Message 65384 - Posted: 21 Feb 2010, 22:42:30 UTC

On the subject of Rosetta Beta 5.98 I've had two WU error this weekend.

rossmann3x3_k006_008_18101_1902_0 & rossmann3x3_k006_007_18101_1248_0


<core_client_version>6.10.18</core_client_version>
<![CDATA[
<message>
Incorrect function. (0x1) - exit code 1 (0x1)
</message>
<stderr_txt>
# cpu_run_time_pref: 10800
sin_cos_range ERROR: -1.#IND000 is outside of [-1,+1] sin and cos value legal range
sin_cos_range ERROR: -1.#IND000 is outside of [-1,+1] sin and cos value legal range
sin_cos_range ERROR: -1.#IND000 is outside of [-1,+1] sin and cos value legal range
sin_cos_range ERROR: -1.#IND000 is outside of [-1,+1] sin and cos value legal range
sin_cos_range ERROR: -1.#IND000 is outside of [-1,+1] sin and cos value legal range
sin_cos_range ERROR: -1.#IND000 is outside of [-1,+1] sin and cos value legal range
sin_cos_range ERROR: -1.#IND000 is outside of [-1,+1] sin and cos value legal range
sin_cos_range ERROR: -1.#IND000 is outside of [-1,+1] sin and cos value legal range
sin_cos_range ERROR: -1.#IND000 is outside of [-1,+1] sin and cos value legal range
sin_cos_range ERROR: -1.#IND000 is outside of [-1,+1] sin and cos value legal range
sin_cos_range ERROR: -1.#IND000 is outside of [-1,+1] sin and cos value legal range
sin_cos_range ERROR: -1.#IND000 is outside of [-1,+1] sin and cos value legal range
sin_cos_range ERROR: -1.#IND000 is outside of [-1,+1] sin and cos value legal range
sin_cos_range ERROR: -1.#IND000 is outside of [-1,+1] sin and cos value legal range
sin_cos_range ERROR: -1.#IND000 is outside of [-1,+1] sin and cos value legal range
sin_cos_range ERROR: -1.#IND000 is outside of [-1,+1] sin and cos value legal range
# random seed: 1135220
ERROR:: Exit from: .make_pdb.cc line: 244

</stderr_txt>
]]>
ID: 65384 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
MarcoA

Send message
Joined: 2 Sep 08
Posts: 9
Credit: 777,433
RAC: 0
Message 65410 - Posted: 24 Feb 2010, 11:11:37 UTC
Last modified: 24 Feb 2010, 11:12:27 UTC

1
2
3

Error, Error and Error.
Fortunately, these WUs took only zero seconds of my precious CPU-time :)
ID: 65410 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Previous · 1 . . . 7 · 8 · 9 · 10

Message boards : Number crunching : Problems with Rosetta version 5.98



©2024 University of Washington
https://www.bakerlab.org