Posts by McPDR

1) Message boards : Number crunching : Report stuck & aborted 5.01 WU here please - III (Message 16005)
Posted 12 May 2006 by McPDR
Post:
Here is one I just aborted after it had spent almost 80 hours trying to process:
http://boinc.bakerlab.org/rosetta/result.php?resultid=17896566
It had been up to about 10% done, then I just rebooted, & it went back down to 1%. 80 hours sure is alot of time...

Thanks, McPDR

That was run under version 5.01. The new version will prevent this from happening again. In the mean time you will get some credit for the Work.


Thanks for your help... Unfortunately, I did not receive any credit (out of 620+) for this result that I had to abort. And now, when I check it today, it has been deleted from the system.

Help please!

Thanks, McPDR

The credit would not have shown up in the stats listing page. It would only have shown in the result for that Work Unit. The project has so far been unable to find a way to display the credit in the stats overview page, because the credit is awarded at the result level. The Maximum credit would have been 300 points. The credit should show in your credit awards from any of the stats sites, and in your project credits. The fact that the Work Unit has been removed from your stats indicates that the process has awarded the credit. The process is run each day.

EDIT: I have just looked at your BOINCstats report. If you follow the link and scroll down the page to the graph graph of daily credit awards you will see a 300 point spike in your stats for May 4. That is most likely the credit granted for the Work Unit in question. A similar spike in credit is shown for the same date in the daily stats charts at the bottom of the same page. That award also jumped you up significantly in the world standings.






Thanks! I do see it now.
2) Message boards : Number crunching : Report stuck & aborted 5.01 WU here please - III (Message 15870)
Posted 11 May 2006 by McPDR
Post:
Here is one I just aborted after it had spent almost 80 hours trying to process:
http://boinc.bakerlab.org/rosetta/result.php?resultid=17896566
It had been up to about 10% done, then I just rebooted, & it went back down to 1%. 80 hours sure is alot of time...

Thanks, McPDR

That was run under version 5.01. The new version will prevent this from happening again. In the mean time you will get some credit for the Work.


Thanks for your help... Unfortunately, I did not receive any credit (out of 620+) for this result that I had to abort. And now, when I check it today, it has been deleted from the system.

Help please!

Thanks, McPDR
3) Message boards : Number crunching : Report stuck & aborted 5.01 WU here please - III (Message 15375)
Posted 3 May 2006 by McPDR
Post:
Here is one I just aborted after it had spent almost 80 hours trying to process:
http://boinc.bakerlab.org/rosetta/result.php?resultid=17896566
It had been up to about 10% done, then I just rebooted, & it went back down to 1%. 80 hours sure is alot of time...

Thanks, McPDR
4) Questions and Answers : Windows : Etra Instance of BOINC Manager Window? (Message 15372)
Posted 3 May 2006 by McPDR
Post:
I have it running as a single user installation. The BOINC manager program is in my startup folder ("C:Program FilesBOINCboincmgr.exe" /s), but I don't remember if it was put in automatically by the install program, or if I put it there myself. If you recommend taking it out, I will do so.

BTW I didn't notice the typo of "EXTRA" in the title until it was too late to change it.

Thanks for your help; standing by before taking any action.



I assume that this must be a fairly common problem. I have had this happen to me occasionally for as long as I can remember. I do also start Boinc on startup. I always just open Boinc via the taskbar, then close the wondow, as you mentioned, to make it go away. Sorry, no answer or solution - just validation that it is not just you.

McPDR
5) Questions and Answers : Windows : Unrecoverable Errors - Incorrect function (Message 2482)
Posted 6 Nov 2005 by McPDR
Post:
For some reason, I keep getting unrecoverable errors on my Rosetta wus:

<core_client_version>4.19</core_client_version>
<message>Incorrect function. (0x1) - exit code 1 (0x1)
</message>
<active_task_state>1</active_task_state>
<signal>0</signal>
<stderr_txt>

</stderr_txt>

I started this project almost a week ago, and I had a bunch work just fine. But now every single one just gets an Unrecoverable Error & dies. This has really gotten annoying.

I assume that they have made some errant change in the code, causing the wus to fail on the 4.19 version of BOINC. I have noticed that other people are also having this problem, & they seem to also be running 4.19.

Some help would be appreciated, but in the meantime, I suppose it ispointless, so I might as well Detach from Rosetta.

Thanks, McPDR






©2024 University of Washington
https://www.bakerlab.org