Sorry to be a bit late on this, but I did notice around 13th March I had a task consuming 2.4Gb and 14Gb of my 16Gb (total) RAM being in use to run 8 tasks.

I can't recall the tasks involved. Right now I'm back to my more usual level of 7.74Gb in use

As of this AM I have 16gb on the ryzen and it's currently showing 81% free memory but that's with no Rosetta as no WUs have come down since early yesterday.

I'll monitor going forward and report back.

So you've got your extra RAM installed already? If it was a RAM issue (with 8Gb) you'll be fine now.

I was only indicating there were some rogue tasks around last week that may have tripped you up back then. Hopefully new tasks play nicer as standard.

Your original question was to ask if there was anything you could do - there probably wasn't at that time and you've more than covered yourself now under normal conditions.

---

As of this AM I have 16gb on the ryzen and it's currently showing 81% free memory but that's with no Rosetta as no WUs have come down since early yesterday.

Yes, we are back to 8086 tasks ready to send according to the server status page which actually means 0 tasks ready to send. Maybe the admins should investigate, what those 8086 tasks are and if they eventually cause the issues.

Up to 10 minutes ago it was still showing those 8086 so that doesn't sound right.

However, I'm here to say a whole load of tasks just came down and the server status page has just changed to show an additional 20k Rosetta tasks in progress and 15k still unsent. No idea how long that will last, but there is some progress.

---

I was watching when a couple of the Rosetta WU failed.

They computed properly down until the TIME REMAINING was zero seconds and the compute time was 8 hours and a few minutes. Instead of reporting the completion, the WU was marked as WAITING with zero seconds remaining. When the WU restarted, it indicated a COMPUTE ERROR with the "finish file present too long</message>". The 34 failing WU seemed to all fail at the end and were 4.08 Linux WU.

https://boinc.bakerlab.org/rosetta/result.php?resultid=1063704662

We had a good run, but no tasks left to download (and that mysterious 8086 ready to send again, whatever that is)

---

I was watching when a couple of the Rosetta WU failed.

They computed properly down until the TIME REMAINING was zero seconds and the compute time was 8 hours and a few minutes. Instead of reporting the completion, the WU was marked as WAITING with zero seconds remaining. When the WU restarted, it indicated a COMPUTE ERROR with the "finish file present too long</message>". The 34 failing WU seemed to all fail at the end and were 4.08 Linux WU.

https://boinc.bakerlab.org/rosetta/result.php?resultid=1063704662

That sounds very similar to mine.

I did notice that a few of mine showed n decoys and then appeared to restart and showed a session with 1 decoy before failing.

Not getting any Tasks on this Host https://boinc.bakerlab.org/rosetta/show_host_detail.php?hostid=3112116
A T630 Server but my other T630 is getting them fine https://boinc.bakerlab.org/rosetta/show_host_detail.php?hostid=3282035
Both running Server 2012 R2

Not getting any Tasks on this Host https://boinc.bakerlab.org/rosetta/show_host_detail.php?hostid=3112116
A T630 Server but my other T630 is getting them fine https://boinc.bakerlab.org/rosetta/show_host_detail.php?hostid=3282035
Both running Server 2012 R2

Looks OK now https://boinc.bakerlab.org/rosetta/results.php?hostid=3112116

Not getting any Tasks on this Host https://boinc.bakerlab.org/rosetta/show_host_detail.php?hostid=3112116
A T630 Server but my other T630 is getting them fine https://boinc.bakerlab.org/rosetta/show_host_detail.php?hostid=3282035
Both running Server 2012 R2

Looks OK now https://boinc.bakerlab.org/rosetta/results.php?hostid=3112116

I suspect that was the last splutterings as the pool was draining, project status is showing 0 tasks unsent (but, as has been said, 8086 tasks ready to send).

Not getting any Tasks on this Host https://boinc.bakerlab.org/rosetta/show_host_detail.php?hostid=3112116
A T630 Server but my other T630 is getting them fine https://boinc.bakerlab.org/rosetta/show_host_detail.php?hostid=3282035
Both running Server 2012 R2

Looks OK now https://boinc.bakerlab.org/rosetta/results.php?hostid=3112116

I suspect that was the last splutterings as the pool was draining, project status is showing 0 tasks unsent (but, as has been said, 8086 tasks ready to send).

Maybe they're tasks for pre-80386 machines? ...

---

Despite having a 6 hour limit set I am currently processing a batch of Rosetta 4.08 WUs that have been running for 8 hours and are showing an estimated 2 hours remaining.

They all have names starting :-

rb_03_21_2022_2162_ab_t000__robetta_cstwt_5.0_FT

Is this normal or are they likely to error out?

This seems odd but I would continue to let it run since it is a relatively large protein to model.

---

This seems odd but I would continue to let it run since it is a relatively large protein to model.

Besides that, the limit is CPU-hours, so depending on what else the CPU has to do, the runtime can be a lot longer.

---

.

This seems odd but I would continue to let it run since it is a relatively large protein to model.

After 10 hours (elapsed and CPU) 2 of them (1064201222 and 1064201281) errored out with the same symptoms I’ve been seeing.

Interestingly the 4 that succeeded (1064201216, 1064201223, 1064201224 and 1064201283) also had the default.out.gz exist, stream information inconsistent error so that is also a red herring.

Validation seems to be offline for the last half hour

---

Validation seems to be offline for the last half hour

And back about 30mins ago, I think

---

Validation seems to be offline for the last half hour

And back about 30mins ago, I think

And off again since 04:00 this morning

Rosetta 4.07 work tasks are reporting 'computational error' immediately they are opened on one of my two computers. Only known difference is affected computer BOINC version is 7.14.2 and the non-affected is earlier version 7.6.33.

I cannot discover how to revert version as a trial.

Trevor ct

---

Rosetta 4.07 work tasks are reporting 'computational error' immediately they are opened on one of my two computers. Only known difference is affected computer BOINC version is 7.14.2 and the non-affected is earlier version 7.6.33.

It is not the BOINC version. I see the errors too (one on each of two Ubuntu machines), and they are both running BOINC 7.14.2.

---

Yeah, I got a bunch of these on different machines, and they all fail when they are resent to someone else.
It's the work units, not your computer.

Thank you. Comforting I am not running a rogue program.

---