Rosetta 4.0+

Message boards : Number crunching : Rosetta 4.0+

To post messages, you must log in.

Previous · 1 . . . 4 · 5 · 6 · 7 · 8 · 9 · 10 . . . 19 · Next

AuthorMessage
Profile Conan
Avatar

Send message
Joined: 11 Oct 05
Posts: 150
Credit: 3,794,203
RAC: 2,238
Message 89087 - Posted: 10 Jun 2018, 7:53:38 UTC - in response to Message 88869.  

Could be this is your problem (and mine...) but don't hold your breath for a fix.


No I wont be holding my breath, as that report, with the same error I have is from the 1st Feb 2018, so no fix for this 32 Bit issue for almost 3 months now.

And all the Ralph work units I have been given that have also failed with the same error have also not been fixed. What is the point of a test project when things are not tested?
No point at all.

Conan


Any progress on the 32 bit Rosetta 4.07 errors?

Rosetta Mini runs fine, so possibly a compiling issue or made for 64 bit instead of 32 bit?

All Rosetta 4.07 work units fail on my 32 bit XP Windows machine, this is on both Ralph and Rosetta.

Linux runs fine as well.

Conan


This issue is still occuring since the 1st of Feburary 2018 (see begining of this thread).

Still getting Rosetta@home | [error] Process creation failed: (unknown error) - error code 193 (0xc1)

Also posted on the 1/2/18 after the first report of this issue was a possible reason for the error that has not been taken up it appears, " Looks like Rosetta 4.06 (4.07) has been compiled using Visual Studio 2015 which does not create XP compatiable programme files"

Could this be the issue?

Rosetta Mini runs without an issue and I have no problems with my Linux machines with either Rosetta Mini or Rosetta work units.

Both Ralph and Rosetta are affected, this fault should of been picked up over at Ralph first before then being released here at Rosetta.

Thanks
Conan
"
ID: 89087 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Viking69
Avatar

Send message
Joined: 3 Oct 05
Posts: 20
Credit: 6,257,783
RAC: 3,445
Message 89094 - Posted: 10 Jun 2018, 21:20:49 UTC
Last modified: 10 Jun 2018, 21:21:22 UTC

I am getting a lot of failures on this current version too. But mine state a memory error, and My PC has never ran out of available RAM. I have 16 GB and I never see it above 12GB used.

One of my errors https://boinc.bakerlab.org/result.php?resultid=1004968726
Hi all you enthusiastic crunchers.....
ID: 89094 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Jim1348

Send message
Joined: 19 Jan 06
Posts: 881
Credit: 52,257,545
RAC: 0
Message 89095 - Posted: 10 Jun 2018, 23:34:56 UTC - in response to Message 89094.  
Last modified: 10 Jun 2018, 23:35:42 UTC

I am getting a lot of failures on this current version too. But mine state a memory error, and My PC has never ran out of available RAM. I have 16 GB and I never see it above 12GB used.

One of my errors https://boinc.bakerlab.org/result.php?resultid=1004968726

These are awfully big values:
Peak working set size 1,492.68 MB
Peak swap size 1,504.54 MB


I normally see about half that (or less); there must be something wrong with the work units.
ID: 89095 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
biodoc

Send message
Joined: 19 Feb 06
Posts: 14
Credit: 30,006,457
RAC: 10,261
Message 89188 - Posted: 29 Jun 2018, 19:30:53 UTC

I'm seeing quite a number of identical computation errors on 2 of my machines. They seem to occur in "bunches". For example, the ryzen had no errors for a couple of days and then I got about 180 of them within a few minutes. My other 2 machines are error free but they are running older kernels (mint 7.3 and 18.3)

computer 1

https://boinc.bakerlab.org/rosetta/results.php?hostid=3420461&offset=0&show_names=0&state=6&appid=

CPU type: 2 x Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz [Family 6 Model 62 Stepping 4]
Number of processors: 40
Coprocessors: NVIDIA Quadro FX 4800 (1535MB) driver: 340.10 OpenCL: 1.0
Operating System: Linux Mint 19 Tara [4.15.0-23-generic|libc 2.27 (Ubuntu GLIBC 2.27-3ubuntu1)]
BOINC version: 7.9.3
Memory: 96602.15 MB

Error:

<core_client_version>7.9.3</core_client_version>
<![CDATA[
<message>
process exited with code 193 (0xc1, -63)</message>
<stderr_txt>
command: ../../projects/boinc.bakerlab.org_rosetta/rosetta_4.07_x86_64-pc-linux-gnu -run:protocol jd2_scripting @flags_rb_06_28_403_572__t000__0_C1_robetta -silent_gz -mute all -out:file:silent default.out -in:file:boinc_wu_zip input_rb_06_28_403_572__t000__0_C1_robetta.zip -nstruct 10000 -cpu_run_time 28800 -watchdog -boinc:max_nstruct 600 -checkpoint_interval 120 -database minirosetta_database -in::file::zip minirosetta_database.zip -boinc::watchdog -run::rng mt19937 -constant_seed -jran 3482852
rosetta_4.07_x86_64-pc-linux-gnu: loadlocale.c:129: _nl_intern_locale_data: Assertion `cnt < (sizeof (_nl_value_type_LC_TIME) / sizeof (_nl_value_type_LC_TIME[0]))' failed.
SIGABRT: abort called
Stack trace (17 frames):
[0x5efead0]
[0x5ffe380]
[0x607e517]
[0x60083a8]
[0x6002794]
[0x60027ee]
[0x6000f73]
[0x6001996]
[0x60007df]
[0x600020e]
[0x5f1d10e]
[0x5f1d73e]
[0x5f1707a]
[0x5f17202]
[0x412631]
[0x5fff8cc]
[0x610b97]

Exiting...

</stderr_txt>
]]>


Computer 2

CPU type: AMD Ryzen 7 2700X Eight-Core Processor [Family 23 Model 8 Stepping 2]
Number of processors: 16
Coprocessors: NVIDIA GeForce GTX 780 Ti (3015MB) driver: 390.67 OpenCL: 1.2
Operating System: Antergos Linux [4.17.2-1-ARCH]
BOINC version: 7.8.6
Memory: 16037.01 MB

<core_client_version>7.8.6</core_client_version>
<![CDATA[
<message>
process exited with code 193 (0xc1, -63)</message>
<stderr_txt>
command: ../../projects/boinc.bakerlab.org_rosetta/rosetta_4.07_x86_64-pc-linux-gnu -relax::minimize_bond_lengths 1 -out:file:silent_struct_type binary -ignore_unrecognized_res 1 -abinitio::rsd_wt_loop 0.5 -abinitio::use_filters false -abinitio::rg_reweight 0.5 -relax::default_repeats 2 -beta 1 -abinitio::increase_cycles 10 -ex2aro 1 -frag9 00001.200.9mers -abinitio::fastrelax 1 -abinitio::detect_disulfide_before_relax 1 -ex1 1 -relax::minimize_bond_angles 1 -beta_cart 1 -in:file:native 00001.pdb -relax::dualspace 1 -optimization::default_max_cycles 200 -abinitio::rsd_wt_helix 0.5 -frag3 00001.200.3mers -in:file:boinc_wu_zip DRH_curve_X_h21_l4_h29_l2_09658_4_loop_11_0001_one_capped_0001_fragments_data.zip -out:file:silent default.out -silent_gz 1 -mute all -nstruct 10000 -cpu_run_time 28800 -watchdog -boinc:max_nstruct 600 -checkpoint_interval 120 -database minirosetta_database -in::file::zip minirosetta_database.zip -boinc::watchdog -run::rng mt19937 -constant_seed -jran 1195778
rosetta_4.07_x86_64-pc-linux-gnu: loadlocale.c:129: _nl_intern_locale_data: Assertion `cnt < (sizeof (_nl_value_type_LC_TIME) / sizeof (_nl_value_type_LC_TIME[0]))' failed.
SIGABRT: abort called
Stack trace (17 frames):
[0x5efead0]
[0x5ffe380]
[0x607e517]
[0x60083a8]
[0x6002794]
[0x60027ee]
[0x6000f73]
[0x6001996]
[0x60007df]
[0x600020e]
[0x5f1d10e]
[0x5f1d73e]
[0x5f1707a]
[0x5f17202]
[0x412631]
[0x5fff8cc]
[0x610b97]

Exiting...

</stderr_txt>
]]>

ID: 89188 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
mmonnin

Send message
Joined: 2 Jun 16
Posts: 54
Credit: 20,058,207
RAC: 31,720
Message 89191 - Posted: 29 Jun 2018, 19:38:26 UTC

Yeah...just abort Rosetta app tasks. Mini works fine. Project admins could fix it if they allow an app selection in user preferences.

For some reason my 2700x works fine but not my 1950x. Both on ubuntu 18.04
ID: 89191 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Trotador

Send message
Joined: 30 May 09
Posts: 108
Credit: 272,283,990
RAC: 1,873
Message 89305 - Posted: 17 Jul 2018, 5:26:38 UTC - in response to Message 88951.  

/etc/locale.conf


Instead of changing language options globally I would suggest limiting changes to only what is needed, in this case BOINC client.

For those using repository BOINC package and systemd distro, you can edit boinc-client.service file or add an override to the service. The override would look something like this:

[Service]
Environment=LC_ALL=C


LC_ALL overrides all the other language settings. Put the override file in /etc/systemd/system/boinc-client.service.d/locale.override.conf and restart the client with sudo systemctl restart boinc-client. If changing the distro supplied service file then find boinc-client.service and add the Environment line in Service section. Changes to the file will be overwritten any time the package is updated.

For those not using distro package or not using systemd make similar change to whatever startup script you use for the client.


I installed BOINC with a .sh file so it is completely within the BOINC folder, what would I have to modify to circumvent the locale error?

<core_client_version>7.6.31</core_client_version>
<![CDATA[
<message>
process exited with code 193 (0xc1, -63)
</message>
<stderr_txt>
command: ../../projects/boinc.bakerlab.org_rosetta/rosetta_4.07_x86_64-pc-linux-gnu @rb_07_16_509_735_ab_t000__h002_robetta_FLAGS -in::file::fasta t000__h002.fasta -psipred_ss2 t000__h002.spider3_ss2 -kill_hairpins t000__h002.nobuformat.spider3_ss2 -abinitio::use_filters true -in:file:boinc_wu_zip rb_07_16_509_735_ab_t000__h002_robetta.zip -frag3 rb_07_16_509_735_ab_t000__h002_robetta.200.3mers.index.gz -fragA rb_07_16_509_735_ab_t000__h002_robetta.200.14mers.index.gz -fragB rb_07_16_509_735_ab_t000__h002_robetta.200.11mers.index.gz -nstruct 10000 -cpu_run_time 28800 -watchdog -boinc:max_nstruct 600 -checkpoint_interval 120 -mute all -database minirosetta_database -in::file::zip minirosetta_database.zip -boinc::watchdog -run::rng mt19937 -constant_seed -jran 3102768
rosetta_4.07_x86_64-pc-linux-gnu: loadlocale.c:129: _nl_intern_locale_data: Assertion `cnt < (sizeof (_nl_value_type_LC_TIME) / sizeof (_nl_value_type_LC_TIME[0]))' failed.
SIGABRT: abort called
Stack trace (17 frames):
[0x5efead0]
[0x5ffe380]
[0x607e517]
[0x60083a8]
[0x6002794]
[0x60027ee]
[0x6000f73]
[0x6001996]
[0x60007df]
[0x600020e]
[0x5f1d10e]
[0x5f1d73e]
[0x5f1707a]
[0x5f17202]
[0x412631]
[0x5fff8cc]
[0x610b97]

Exiting...

</stderr_txt>
]]>
ID: 89305 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
henfredemars

Send message
Joined: 26 Aug 18
Posts: 1
Credit: 2,629,424
RAC: 2,402
Message 89466 - Posted: 31 Aug 2018, 23:10:02 UTC

It took me hours to find a fix for this! I am so glad that others have found this problem and found a solution. Setting the locale to C using systemd's service file worked perfectly.

Please don't statically link to glibc. That's just a bad idea.

Hint: Ubuntu users, you can use
systemctl show boinc-client.service | grep Path
...to find the service file.
ID: 89466 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Profile [AF>Libristes]Maeda
Avatar

Send message
Joined: 18 Aug 11
Posts: 4
Credit: 4,412,775
RAC: 3,229
Message 89475 - Posted: 1 Sep 2018, 20:43:31 UTC

Thanks for tips :)
I stopped this project since May on one of my computer (that have a 'on the edge' distro) and just tried your solution.

Let's see if all's right now !
ID: 89475 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Sid Celery

Send message
Joined: 11 Feb 08
Posts: 1965
Credit: 38,162,917
RAC: 9,188
Message 89517 - Posted: 10 Sep 2018, 13:26:34 UTC - in response to Message 88466.  

While reporting that weird PF task in another thread, I was aware I had many others finished with a Compute Error and should actually be in this thread. Problems of various types with PF tasks have been going on all year, still unsolved. Next post will show my current Compute error tasks.

Another week goes by, another 7 PF* tasks coming up with the same "nan" error after running to apparent completion

And 7 more in the last few days - all basically the same, except this time they all quote a path before the error and didn't run to completion. Looks like a minor coding error

PF12224.7_bnd_aivan_SAVE_ALL_OUT_03_09_549478_1191_0
PF10009.8_bnd_aivan_SAVE_ALL_OUT_03_09_549478_3911_0
PF10009.8_bnd_aivan_SAVE_ALL_OUT_03_09_549478_3915_0
PF05975.11_bnd_aivan_SAVE_ALL_OUT_03_09_549479_3925_0
PF02010.14_bnd_aivan_SAVE_ALL_OUT_03_09_549478_5257_0
PF05982.11_bnd_aivan_SAVE_ALL_OUT_03_09_543807_1803_0

Application version Rosetta v4.07 windows_x86_64
File: C:cygwin64homeboincRosettamainsourcesrccore/pack/dunbrack/SingleResidueDunbrackLibrary.hh:306
chi angle must be between -180 and 180: nan


PF11832.7_bnd_aivan_SAVE_ALL_OUT_03_09_549479_4185_0
Application version Rosetta v4.07 windows_intelx86
File: C:cygwinhomeboincRosettamainsourcesrccore/pack/dunbrack/SingleResidueDunbrackLibrary.hh:306
chi angle must be between -180 and 180: nan

ID: 89517 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Sid Celery

Send message
Joined: 11 Feb 08
Posts: 1965
Credit: 38,162,917
RAC: 9,188
Message 89519 - Posted: 10 Sep 2018, 13:46:55 UTC - in response to Message 89517.  

Further PF tasks resulting in a Compute Error.
All ran several hours before failing.
None called for an excessive amount of memory.
All seem to be Rosetta v4.07 windows_x86_64 jobs (needs verifying) - none are Mini Rosetta 3.78 tasks

Note: not all PF tasks are erroring out - many go through fine. But many don't, all showing error "chi angle must be between -180 and 180: nan"

PF08894.10_nojmps_aivan_SAVE_ALL_OUT_03_09_686468_2970_0
PF04317.11_jmps_aivan_SAVE_ALL_OUT_03_09_686470_3937_1
PF09820.8_nojumps_aivan_SAVE_ALL_OUT_03_09_686286_6530_1
PF06775.13_nojmps_aivan_SAVE_ALL_OUT_03_09_686691_257_0
PF14460.5_nojmps_aivan_SAVE_ALL_OUT_03_09_686691_1533_0
PF13731.5_nojmps_aivan_SAVE_ALL_OUT_03_09_686649_2900_0
PF14092.5_nojmps_aivan_SAVE_ALL_OUT_03_09_686649_6572_0
PF07774.12_nojmps_aivan_SAVE_ALL_OUT_03_09_686649_4239_0
PF04317.11_jmps_aivan_SAVE_ALL_OUT_03_09_686470_12934_1


Outcome Computation error
Exit status 1 (0x00000001) Unknown error code
CPU time 3 hours 7 min 15 sec
Validate state Invalid
Credit 0.00
Application version Rosetta v4.07 windows_x86_64
Peak working set size 578.39 MB

Stderr output
<core_client_version>7.12.1</core_client_version>
<![CDATA[
<message>
Incorrect function.
(0x1) - exit code 1 (0x1)</message>
<stderr_txt>
command: projects/boinc.bakerlab.org_rosetta/rosetta_4.07_windows_x86_64.exe @PF08894.10.nojmps.flags -in:file:boinc_wu_zip PF08894.10.nojmps.zip -nstruct 10000 -cpu_run_time 28800 -watchdog -boinc:max_nstruct 600 -checkpoint_interval 120 -mute all -database minirosetta_database -in::file::zip minirosetta_database.zip -boinc::watchdog -run::rng mt19937 -constant_seed -jran 2105339
Starting watchdog...
Watchdog active.
std::cerr: Exception was thrown:

File: C:cygwin64homeboincRosettamainsourcesrccore/pack/dunbrack/SingleResidueDunbrackLibrary.hh:306
chi angle must be between -180 and 180: nan

</stderr_txt>
]]>


One very specific weird PF error reported here. Related, it seems, but different
PF13731.5_jmps_aivan_SAVE_ALL_OUT_03_09_686650_5044_0
ID: 89519 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Sid Celery

Send message
Joined: 11 Feb 08
Posts: 1965
Credit: 38,162,917
RAC: 9,188
Message 89520 - Posted: 10 Sep 2018, 14:06:24 UTC

One new thing to report, confirmed here this morning:

ALL "cis_paper_simulation" tasks seem to fail within seconds. Less of a problem to me as no computing time is wasted. Errors of 2 types, as shown below.

cis_paper_simulation_3_4_5_nmet_SAVE_ALL_OUT_686721_56_0
cis_paper_simulation_3_nmet_SAVE_ALL_OUT_686724_38_0
cis_paper_simulation_2_3_4_5_nmet_SAVE_ALL_OUT_686713_301_0
cis_paper_simulation_4_nmet_SAVE_ALL_OUT_686726_458_0
cis_paper_simulation_3_4_5_nmet_SAVE_ALL_OUT_686721_560_0
cis_paper_simulation_2_3_nmet_SAVE_ALL_OUT_686716_579_1
cis_paper_simulation_1_2_3_5_nmet_SAVE_ALL_OUT_686699_548_1
cis_paper_simulation_1_2_nmet_SAVE_ALL_OUT_686704_165_1
cis_paper_simulation_1_4_nmet_SAVE_ALL_OUT_686710_164_1
cis_paper_simulation_1_2_4_nmet_SAVE_ALL_OUT_686702_165_1
cis_paper_simulation_3_4_nmet_SAVE_ALL_OUT_686722_164_1
cis_paper_simulation_4_nmet_SAVE_ALL_OUT_686726_163_1
cis_paper_simulation_2_3_5_nmet_SAVE_ALL_OUT_686715_739_1
cis_paper_simulation_1_2_3_4_nmet_SAVE_ALL_OUT_686698_619_1

Typical error report
Outcome Computation error
Client state Compute error
Exit status 1 (0x00000001) Unknown error code
Run time 38 sec
CPU time 9 sec
Validate state Invalid
Credit 0.00
Application version Rosetta v4.07 windows_x86_64
Peak working set size 31.89 MB

Stderr output
<core_client_version>7.12.1</core_client_version>
<![CDATA[
<message>
Incorrect function.
(0x1) - exit code 1 (0x1)</message>
<stderr_txt>
command: projects/boinc.bakerlab.org_rosetta/rosetta_4.07_windows_x86_64.exe @cis_paper_simulation_3_4_5_nmet.flags -nstruct 10000 -cpu_run_time 28800 -watchdog -boinc:max_nstruct 600 -checkpoint_interval 120 -mute all -database minirosetta_database -in::file::zip minirosetta_database.zip -boinc::watchdog -run::rng mt19937 -constant_seed -jran 3675618

ERROR: Cannot open file "native.pdb"
ERROR:: Exit from: ......srccoreimport_poseimport_pose.cc line: 332
BOINC:: Error reading and gzipping output datafile: default.out
03:56:04 (2416): called boinc_finish(1)

</stderr_txt>
]]>


cis_paper_simulation_1_3_4_5_nmet_SAVE_ALL_OUT_686705_304_0
cis_paper_simulation_1_3_4_nmet_SAVE_ALL_OUT_686706_458_0

Outcome Computation error
Client state Compute error
Exit status 1 (0x00000001) Unknown error code
Run time 9 sec
CPU time
Validate state Invalid
Credit 0.00
Application version Rosetta v4.07 windows_x86_64
Peak working set size 24.84 MB

Stderr output
<core_client_version>7.12.1</core_client_version>
<![CDATA[
<message>
Incorrect function.
(0x1) - exit code 1 (0x1)</message>
<stderr_txt>
command: projects/boinc.bakerlab.org_rosetta/rosetta_4.07_windows_x86_64.exe @cis_paper_simulation_1_3_4_5_nmet.flags -nstruct 10000 -cpu_run_time 28800 -watchdog -boinc:max_nstruct 600 -checkpoint_interval 120 -mute all -database minirosetta_database -in::file::zip minirosetta_database.zip -boinc::watchdog -run::rng mt19937 -constant_seed -jran 3691370
ERROR: Illegal value for integer option -cyclic_peptide:n_methyl_positions specified: 1_3_4_5

</stderr_txt>
]]>

ID: 89520 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
neil

Send message
Joined: 22 Dec 06
Posts: 3
Credit: 18,133,363
RAC: 13
Message 89528 - Posted: 11 Sep 2018, 1:22:44 UTC

Greetings:

I have four identical machines running Ubuntu 18.04.1 LTS (GNU/Linux 4.15.0-33-generic x86_64), each with a dual-core Intel E8400 cpu. For the last few weeks I've also been unable to run any 4.07 units, they all throw a Computation Error after a couple of seconds...

I've tried the suggestion for editing the /etc/default/locale file, rebooting, etc... No joy.

Unless someone has an actual working suggestion, I'm just going to flat stop running Rosetta and switch to World Community Grid, at least until Rosetta gets their act together.

Sorry!
ID: 89528 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
aad

Send message
Joined: 5 Jan 06
Posts: 9
Credit: 192,900,992
RAC: 35,150
Message 89530 - Posted: 11 Sep 2018, 14:28:02 UTC

I have several Linux machines running Rosetta.
The ones I upgraded from Linux Mint 18.3 to Mint 19 works fine with all wu' s.
The ' clean install' machines on Mint 19 all fail to run the 4.07 wu' s.
ID: 89530 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Sid Celery

Send message
Joined: 11 Feb 08
Posts: 1965
Credit: 38,162,917
RAC: 9,188
Message 89543 - Posted: 12 Sep 2018, 20:20:36 UTC
Last modified: 12 Sep 2018, 20:23:00 UTC

A few more PF task errors, but this time a different error and on my 2 Laptops rather than my Desktop. The Desktop is running fine now as it's not running (m)any PF tasks.
One an Intel Core 2 Duo T6600 running W7, the other an AMD FX9830 running W10, but both showing the exact same error message:

fp0910_db_37_43_msd3_Y_A_fragments_abinitio_SAVE_ALL_OUT_686991_726_0
fp0910_db_131_43_msd3_Y_fragments_abinitio_SAVE_ALL_OUT_686994_273_0
fp0910_db_37_43_msd4_X_A_fragments_abinitio_SAVE_ALL_OUT_686990_1178_1

ERROR: ERROR: FragmentIO: could not open file 00001.200.9mers
ERROR:: Exit from: ......srccorefragmentFragmentIO.cc line: 233
BOINC:: Error reading and gzipping output datafile: default.out
called boinc_finish

ID: 89543 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Profile [VENETO] boboviz

Send message
Joined: 1 Dec 05
Posts: 1847
Credit: 7,987,420
RAC: 8,669
Message 89585 - Posted: 19 Sep 2018, 10:25:03 UTC
Last modified: 19 Sep 2018, 10:25:58 UTC

A lot of errors after few seconds
1029496426
1029496442
etc

File: ......srccoreposeutil.cc:703
Atom 'CB 23' not found


File: ......srccoreposeutil.cc:703
Atom 'CB 86' not found


And others "atom......not found"
ID: 89585 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Profile [VENETO] boboviz

Send message
Joined: 1 Dec 05
Posts: 1847
Credit: 7,987,420
RAC: 8,669
Message 89589 - Posted: 19 Sep 2018, 11:56:43 UTC - in response to Message 89585.  

And others "atom......not found"


Up to now:
Atom 38
Atom 246
Atom 84
Atom 66
Atom 186
ID: 89589 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Profile [VENETO] boboviz

Send message
Joined: 1 Dec 05
Posts: 1847
Credit: 7,987,420
RAC: 8,669
Message 89591 - Posted: 19 Sep 2018, 14:33:53 UTC - in response to Message 89589.  

Today 5 wus finished and 50 failed.
Please admins, if you want to test your app, use Ralph (i'm happy to help you in this beta project)
But don't waste my time and my internet connection with Rosetta, that is stable production.
ID: 89591 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Admin
Project administrator

Send message
Joined: 1 Jul 05
Posts: 4805
Credit: 0
RAC: 0
Message 89680 - Posted: 2 Oct 2018, 17:48:22 UTC

Sorry for the recent batches of bad workunits. I've talked to the researcher who was responsible and we canceled them as soon as we noticed the issue.
ID: 89680 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
James W

Send message
Joined: 25 Nov 12
Posts: 130
Credit: 1,766,254
RAC: 0
Message 89725 - Posted: 16 Oct 2018, 20:35:55 UTC

Application version Rosetta v4.07 windows_intelx86
Device: 1759960, Task: 1035040309, and WU 932446587.
Name: BDW_mal_pep_CSPFab43peptide21_0001_renumbered_N-10_C-2_0003_abinitio_1_abinitio_SAVE_ALL_OUT_699471_159_0
Status: 1 (0x00000001) Unknown error code.
<core_client_version>7.10.2</core_client_version>
<![CDATA[<message>Incorrect function. (0x1) - exit code 1 (0x1)</message>

ERROR: ERROR: FragmentIO: could not open file 00001.500.6mers
ERROR: Exit from: ......srccorefragmentFragmentIO.cc line: 233
BOINC: Error reading and gzipping output datafile: default.out
12:51:41 (3928): called boinc_finish(1)

Run time was only 27 seconds prior to error, with CPU time 18 sec.
ID: 89725 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Jim1348

Send message
Joined: 19 Jan 06
Posts: 881
Credit: 52,257,545
RAC: 0
Message 89726 - Posted: 17 Oct 2018, 20:52:30 UTC - in response to Message 89725.  
Last modified: 17 Oct 2018, 20:55:46 UTC

Same here, but Rosetta 4.08 (Ubuntu 16.04).

<core_client_version>7.12.0</core_client_version>
<![CDATA[
<message>
process exited with code 1 (0x1, -255)</message>
<stderr_txt>
command: ../../projects/boinc.bakerlab.org_rosetta/rosetta_4.08_x86_64-pc-linux-gnu -fragA 00001.500.6mers -fragB 00001.500.4mers -in:file:fasta 00001.fasta -abinitio::increase_cycles 10 -mute all -abinitio::fastrelax -relax::default_repeats 15 -abinitio::rsd_wt_helix 0.5 -abinitio::rsd_wt_loop 0.5 -abinitio::use_filters false -ex1 -ex2aro -in:file:boinc_wu_zip cp_CSPFab43peptide21_0001_renumbered_N-10_C-2_0003_abinitio_1_fold_data.zip -out:file:silent default.out -silent_gz -in:file:native 00001.pdb -out:file:silent_struct_type binary -detect_disulf true -fix_disulf disulf -constraints::cst_file CB_cst -constraints:cst_weight 1 -number_9mer_frags 150 -number_3mer_frags 150 -beta -nstruct 10000 -cpu_run_time 28800 -watchdog -boinc:max_nstruct 600 -checkpoint_interval 120 -database minirosetta_database -in::file::zip minirosetta_database.zip -boinc::watchdog -run::rng mt19937 -constant_seed -jran 1887503

ERROR: ERROR: FragmentIO: could not open file 00001.500.6mers
ERROR:: Exit from: src/core/fragment/FragmentIO.cc line: 233
BACKTRACE:
[0x5a57db6]
[0x398a65a]
[0x12cfd45]
[0x12dbc88]
[0x12e4ef4]
[0x41281d]
[0x5ff3ccc]
[0x6108e7]
BOINC:: Error reading and gzipping output datafile: default.out
15:51:52 (21457): called boinc_finish(1)

</stderr_txt>

https://boinc.bakerlab.org/result.php?resultid=1035160110
ID: 89726 · Rating: 0 · rate: Rate + / Rate - Report as offensive    Reply Quote
Previous · 1 . . . 4 · 5 · 6 · 7 · 8 · 9 · 10 . . . 19 · Next

Message boards : Number crunching : Rosetta 4.0+



©2024 University of Washington
https://www.bakerlab.org